
SIMONA® cable conduits made of polyethylene
Premium-quality plastic pipes for safe transport of power and data
SIMONA® cable conduits are available as different variants and with a range of property profiles. They comprise single and multilayer pipes with functional layers made of premium-quality raw materials:
- PE 100
in top standard quality of the PE 100+ Association as per DIN 8074/75 + DIN EN 12201
- PE 100 RC
with increased resistance to slow crack propagation as per DIN 8074/75 + DIN EN 12201 + PAS 1075
- PE RT
with increased thermal resistance up to 70°C as per DIN EN ISO 24033 + DIN 16833
Your benefits at a glance
- An extensive product range (d = 10 - 1,200 mm)
- PE materials with long-term thermal resistance for permanent use subject to increased thermal stress
- Tested and externally monitored pipe quality with factory test certificates
- Pipes made of PE 100 RC material, also with additive protective jacket SPC for trenchless pipelaying methods
- On request: with additional ultra-smooth inner layer for long cable insertion distances
- Customising: tailor-made pipe configurations for special applications on request
Our pipe variants
Variant   |
Material |
Pipe design |
---|---|---|
PE 100 / PE 100 RC |
Solid-wall pipe made of PE 100 or PE 100 RC | |
PE RT 2S | Two-layer pipe made of PE RT with UV-stabilised outer skin, increased thermal resistance up to 70°C | |
PE 100 SPC RC 2S / PE SPC RT 3S |
Two-layer pipe made of PE 100 RC or PE RT with additional protective jacket made of modified PP as per PAS 1075 Type 3 |
Overview of our pipe variants
Pipe variant 1

Pipe made of PE 100 / PE 100 RC
Pipe variant 2
PE RT with coloured outer layer (2S)
Pipe variant 3
PE RT featuring additional protective jacket with stripes made of modified PP as per PAS 1075 Type 3 (2S)
With ultra-smooth inner layer as optional:
PE 100 with ultra-smooth inner layer (2S)
PE RT with ultra-smooth inner layer and outer layer made of PE 100 (3S)
PE RT with ultra-smooth inner layer and featuring additional protective jacket made of modified PP as per PAS 1075 Type 3 (3S)
Standards and specifications
Standard / Specification |
Description |
---|---|
DIN 8074/8075 |
Polyethylene (PE) pipes - PE 80, PE 100 - Dimensions |
DIN 16833 |
Polyethylene pipes with increased thermal resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, tests |
DIN 16876 |
Pipes and fittings of high-density polyethylene (PE-HD) for buried cable ducting - Dimensions and technical delivery condition |
PAS 1075 |
Polyethylene pipes for alternative laying techniques - Dimensions, technical requirements and testing |
DIN EN ISO 9080 |
Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form |
DIN EN ISO 22391 |
Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Typ I und PE-RT Typ II - requirements, method of testing, performances |
DIN EN ISO 24033 |
Polyethylene pipes with increased thermal resistance (PE-RT) - Influence of time and temperature on the expected strength |
DIN EN 12201 |
Plastic piping systems for water supply and for drainage and wastewater pressure pipes - Polyethylene (PE) |